Solar panel glass replacement
the glass on the solar panel is a kind of low-iron tempered glass, also known as white glass, with a common thickness of about 3.2 mm. the light transmittance is over 90% in the wavelength range of the solar cell's spectral response (320-1100nm). the infrared light of 1200nm has a higher reflectivity. solar panel glass has the advantages of resistance to ultraviolet radiation and ensuring that the light transmittance does not decrease.
the toughening performance of solar panel glass must meet the national standard gb9963-88, and the impact resistance of the packaged module must meet the performance indicators specified in the national standard gb9535-88 ground silicon solar cell environmental test method before it can be put into use.
because the solar cell module is laminated by 5 layers, the surface glass and the original module are glued together by eva. eva is a hot-melt adhesive with a thickness between 0.4 mm and 0.6 mm. the surface is flat and the thickness is uniform, with cross-linking agent inside. eva is non-sticky and anti-sticky at room temperature. after a certain heating and pressure adjustment, it will melt and bond, cross-link and solidify, and become completely transparent.
the cured eva can withstａnd atmospheric changes and is elastic. it covers and underlays the cell, encapsulates it, and combines it with the upper protective material glass and the lower protective material backplane (tpt, bbf, etc.) using a vacuum layer the pressing technology is integrated. on the other hand, it can increase the light transmittance of the glass after being bonded to the glass, play an anti-reflection effect, and have a gain effect on the output of the solar panel. the original solar panel is very thin, so it is easy to damage the fragile cell if you just take out the glass.
厢式压滤机与板框压滤机的进料压力有什么不同?
风机的使用，维护，保养说明
橡套电缆的产品概述
平板硫化试验的工作原理
广西柳州米粉机器好用吗
Solar panel glass replacement
磁力搅拌器使用时应注意哪些事项
机械密封安装前对轴与轴套的检查有哪些要求？
酸碱池使用环氧树脂玻璃鳞片胶泥的好处有哪些
欧航牛舍风机保养维护攻略
BURKERT电磁阀工作寿命介绍
脉冲式安全阀
热处理箱式电阻炉的操作流程
平口钳（机用虎钳）的介绍和构造
安东帕碳化硅合成管在微波合成领域的特殊应用
非标B1级保温棉容重是多少密度如何
脱硫塔防腐高温鳞片胶泥
实验室的5个常见功能
龙圩不锈钢滚筒秤*岑溪防水台秤*恭城150吨地磅*桂林60T汽车衡
浅析火花机加工间隙状态的鉴别与检测（下）
the toughening performance of solar panel glass must meet the national standard gb9963-88, and the impact resistance of the packaged module must meet the performance indicators specified in the national standard gb9535-88 ground silicon solar cell environmental test method before it can be put into use.
because the solar cell module is laminated by 5 layers, the surface glass and the original module are glued together by eva. eva is a hot-melt adhesive with a thickness between 0.4 mm and 0.6 mm. the surface is flat and the thickness is uniform, with cross-linking agent inside. eva is non-sticky and anti-sticky at room temperature. after a certain heating and pressure adjustment, it will melt and bond, cross-link and solidify, and become completely transparent.
the cured eva can withstａnd atmospheric changes and is elastic. it covers and underlays the cell, encapsulates it, and combines it with the upper protective material glass and the lower protective material backplane (tpt, bbf, etc.) using a vacuum layer the pressing technology is integrated. on the other hand, it can increase the light transmittance of the glass after being bonded to the glass, play an anti-reflection effect, and have a gain effect on the output of the solar panel. the original solar panel is very thin, so it is easy to damage the fragile cell if you just take out the glass.
厢式压滤机与板框压滤机的进料压力有什么不同?
风机的使用，维护，保养说明
橡套电缆的产品概述
平板硫化试验的工作原理
广西柳州米粉机器好用吗
Solar panel glass replacement
磁力搅拌器使用时应注意哪些事项
机械密封安装前对轴与轴套的检查有哪些要求？
酸碱池使用环氧树脂玻璃鳞片胶泥的好处有哪些
欧航牛舍风机保养维护攻略
BURKERT电磁阀工作寿命介绍
脉冲式安全阀
热处理箱式电阻炉的操作流程
平口钳（机用虎钳）的介绍和构造
安东帕碳化硅合成管在微波合成领域的特殊应用
非标B1级保温棉容重是多少密度如何
脱硫塔防腐高温鳞片胶泥
实验室的5个常见功能
龙圩不锈钢滚筒秤*岑溪防水台秤*恭城150吨地磅*桂林60T汽车衡
浅析火花机加工间隙状态的鉴别与检测（下）